Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 871
debug ip bgp ipv6 unicast updates
c e
View information about BGP updates.
Syntax
debug ip bgp ipv6 unicast ipv6-address prefix-length updates [in | out]
To disable debugging, enter
no debug ip bgp ipv6 unicast ipv6-address prefix-length
updates [in | out] command.
Parameters
Defaults
Disabled.
Command Modes
EXEC Privilege
Command
History
distance bgp
c e
Define an administrative distance for routes.
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, enter no distance bgp.
Parameters
ipv6-address prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the
/x format.
Range: /0 to /128
The
:: notation specifies successive hexadecimal fields of zeros
updates
Enter the keyword updates to view BGP update information.
in
(OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out
(OPTIONAL) Enter the keyword out to view only BGP updates sent
to neighbors.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced on E-Series TeraScale
external-distance
Enter a number to assign to routes learned from a neighbor external to the
AS.
Range: 1 to 255.
Default: 20