Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 883
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp
ipv6 unicast summary command. The text line above the route table states the
number of COMMUNITY attributes found.
show ip bgp ipv6 unicast community-list
c e
View routes that are affected by a specific community list.
Syntax
show ip bgp ipv6 unicast community-list community-list-name
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
community-number
Enter the community number in AA:NN format where AA is the AS
number (2 bytes) and NN is a value specific to that autonomous system.
You can specify up to eight community numbers to view information on
those community groups.
local-AS
Enter the keywords local-AS to view all routes with the COMMUNITY
attribute of NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03)
community attribute must not be advertised to external BGP peers.
no-advertise
Enter the keywords no-advertise to view all routes containing the
well-known community attribute of NO_ADVERTISE.
All routes with the NO_ADVERTISE (0xFFFFFF02) community
attribute must not be advertised to other BGP peers.
no-export
Enter the keywords no-export to view all routes containing the
well-known community attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community attribute
must not be advertised outside a BGP confederation boundary.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced on E-Series TeraScale
community-list-name
Enter the name of a configured IP community list.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced on E-Series TeraScale