Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 891
EXEC Privilege
Command
History
Related
Commands
show ip bgp ipv6 unicast summary
c e
Allows you to view the status of all BGP connections.
Syntax
show ip bgp ipv6 unicast summary
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ip bgp ipv6 unicast summary
BGP router identifier 5.5.10.4, local AS number 100
BGP table version is 12, main routing table version 12
2 network entrie(s) and 4 paths using 536 bytes of memory
1 BGP path attribute entrie(s) using 112 bytes of memory
1 BGP AS-PATH entrie(s) using 39 bytes of memory
Dampening enabled. 0 history paths, 0 dampened paths, 0 penalized paths
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/Pfx
5ffe:10::3 1 28 0 12 0 0 00:01:01 2
5ffe:11::3 1 27 0 12 0 0 00:00:55 2
FTOS#
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced on E-Series TeraScale
neighbor peer-group (assigning peers) Assign peer to a peer-group.
neighbor peer-group (creating group) Create a peer group.
Version 8.3.19.0 Introduced on S4820T
Version 8.4.2.1 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced on E-Series TeraScale
Table 27-4. show ip bgp summary Command Fields
Field Description
BGP router identifier Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table version.
network entries Displays the number of network entries and route paths and the
amount of memory used to process those entries.
BGP path attribute entries Displays the number of BGP path attributes and the amount of
memory used to process them.