Reference Guide

iSCSI Optimization | 897
Command
History
Usage
Information
You can configure up to 16 target TCP ports on the switch in one command or multiple commands.
When you use the
no iscsi target port command and the TCP port to be deleted is one bound to a
specific IP address, the IP address value must be included in the command.
show iscsi
Display the currently configured iSCSI settings.
Syntax
show iscsi
Command Mode
EXEC
EXEC Privilege
Command
History
Example
FTOS#show iscsi
iSCSI is enabled
iSCSI session monitoring is disabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
Related
Commands
show iscsi session
Display information on active iSCSI sessions on the switch.
Syntax
show iscsi session
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810. Support added for cam modification.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module
show iscsi session Display information on active iSCSI sessions on the switch.
show iscsi session detailed Display detailed information on active iSCSI sessions on the switch.
show run iscsi show run iscsi