Reference Guide

Intermediate System to Intermediate System (IS-IS) | 909
debug isis spf-triggers
e
Enable debugging on the events that triggered IS-IS shortest path first (SPF) events for debugging
purposes.
Syntax
debug isis spf-triggers
To turn off debugging, enter no debug isis spf-triggers.
Command Modes
EXEC Privilege
Command
History
debug isis update-packets
e
Enable debugging on Link State PDUs (LSPs) that are detected by a router.
Syntax
debug isis update-packets [interface]
To turn off debugging, enter the no debug isis update-packets [interface] command.
Parameters
Command Modes
EXEC Privilege
Command
History
Version 8.3.12.0 Introduced on S4810
Version 6.3.1.0 Introduced
Version 8.3.19.0 Introduced on S4820T
Version 8.3.12.0 Introduced on S4810
Version 6.3.1.0 Introduced
interface
(OPTIONAL) Identifies the interface type slot/port as one of the following:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed
by the slot/port information.
• For a Port Channel interface, enter the keyword port-channel followed by a
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from 1 to 4094.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.12.0 Introduced on S4810
Version 6.3.1.0 Introduced