Reference Guide

962 | Layer 2
www.dell.com | support.dell.com
Parameters
Defaults
1800 seconds
Command Modes
CONFIGURATION
INTERFACE VLAN (E-Series only)
Command
History
Related
Commands
mac-address-table static
c e s
Associate specific MAC or hardware addresses to an interface and VLANs.
Syntax
mac-address-table static mac-address output interface vlan vlan-id
To remove a MAC address, use the no mac-address-table static mac-address output
interface vlan vlan-id command.
seconds
Enter either zero (0) or a number as the number of seconds before MAC addresses are
relearned. To disable aging of the MAC address table, enter 0.
E-Series Range from CONFIGURATION mode: 10 - 1000000
E-Series Range from INTERFACE VLAN mode: 1 - 1000000
C-Series and S-Series Range: 10 - 1000000
Default: 1800 seconds
Version 8.3.19.0 Introduced on S4820T.
Version 8.3.7.0 Introduced on S4810
Version 8.3.1.0 On the E-Series, available in INTERFACE VLAN context and reduced
minimum aging time in INTERFACE VLAN context from 10 seconds
to 1 second.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
mac learning-limit Set the MAC address learning limits for a selected interface.
show mac-address-table aging-time Display the MAC aging time.