Reference Guide

972 | Layer 2
www.dell.com | support.dell.com
Example
(show cam mac
linecard)
FTOS#show cam mac linecard 2 port-set 0
VlanId Mac Address Region Interface
0 ff:ff:ff:ff:ff:ff STATIC 00001
4094 00:00:a0:00:00:00 DYNAMIC Gi 2/0
!-------------output truncated-------------------!
show cam mac linecard (dynamic or static)
c e
Display the CAM size and the portions allocated for MAC addresses and for MAC
ACLs.
Syntax
show cam mac linecard slot port-set port-pipe [address mac_addr | dynamic | interface
interface | static | vlan vlan-id]
Parameters
Command Modes
EXEC
linecard slot
(REQUIRED) Enter the keyword linecard followed by a slot number
to select the linecard for which to gather information.
C-Series Range: 0 to 4 (C150); 0 to 8 (C300)
E-Series Range: 0 to 6
port-set port-pipe
(REQUIRED) Enter the keyword port-set followed by a Port-Pipe
number to select the Port-Pipe for which to gather information.
Range: 0 or 1
address mac-addr (OPTIONAL) Enter the keyword address followed by a MAC
address in the nn:nn:nn:nn:nn:nn format to display information on
that MAC address.
dynamic
(OPTIONAL) Enter the keyword dynamic to display only those
MAC addresses learned dynamically by the switch.
interface interface (OPTIONAL) Enter the keyword interface followed by the interface
type, slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel
followed by a number:
C-Series Range: 1 to 128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
static
(OPTIONAL) Enter the keyword static to display only those MAC
address specifically configured on the switch.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to
display the MAC address assigned to the VLAN.
Range: 1 to 4094.