Reference Guide

976 | Layer 2
www.dell.com | support.dell.com
Example
FTOS#show mac-address-table
VlanId Mac Address Type Interface State
999 00:00:00:00:00:19 Sticky Gi 0/1 Active
999 00:00:00:00:00:29 Dynamic Gi 0/2 Active
FTOS#
Example
(show
mac-address-table
count)
FTOS# show mac-address-table count
MAC Entries for all vlans :
Dynamic Address Count : 110
Static Address (User-defined) Count : 0
Sticky Address Count : 0
Total Synced Mac from Peer(N): 100
Total MAC Addresses in Use: 110
FTOS#
Related
Commands
Table 31-1. show mac-address-table Information
Column Heading Description
VlanId Displays the VLAN ID number.
Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type Lists whether the MAC address was manually configured (Static), learned
dynamically (Dynamic), or associated with a specific port (Sticky).
Interface Displays the interface type and slot/port information. The following
abbreviations describe the interface types:
• gi — Gigabit Ethernet followed by a slot/port.
• po — Port Channel followed by a number. Range: 1 to 255 for TeraScale
• so — Sonet followed by a slot/port.
• te — 10-Gigabit Ethernet followed by a slot/port.
State Lists if the MAC address is in use (Active) or not in use (Inactive).
Table 31-2. show mac-address-table count Information
Line Beginning with Description
MAC Entries... Displays the number of MAC entries learnt per
VLAN.
Dynamic Address... Lists the number of dynamically learned MAC
addresses.
Static Address... Lists the number of user-defined MAC addresses.
Total MAC... Lists the total number of MAC addresses used by
the switch.
show mac-address-table aging-time Display MAC aging time.