Reference Guide

978 | Layer 2
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
MAC Accounting information can be accessed using SNMP via the Force10 Monitor
MIB. For more information on enabling SNMP, refer to Chapter 3 of the FTOS
Configuration Guide.
Example
FTOS#sh mac accounting destination interface gigabitethernet 2/
1
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Te 11/0 1000 10000 5120000
00:44:00:00:00:01 Te 11/0 1000 10000 5120000
00:22:00:00:00:00 Te 11/0 1000 10000 5120000
00:44:00:00:00:02 Te 11/0 2000 10000 5120000
00:44:00:00:00:01 Te 11/0 2000 10000 5120000
FTOS#
Related
Commands
mac-address (OPTIONAL) Enter the MAC address in the nn:nn:nn:nn:nn:nn
format to display information on that MAC address.
interface interface (OPTIONAL) Enter the keyword interface followed by the interface
type, slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to
display the MAC address assigned to that VLAN.
Range: 1 to 4094.
Version 8.3.19.0 Introduced on S4820T.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on S4810
pre-Version
6.2.1.1
Introduced on E-Series
Note: Currently, the Force10 MONITOR MIB does not return the MAC addresses in
an increasing order via SNMP. As a workaround, you can use the
-C c option in
snmpwalk or snmpbulkwalk to access the Force10 MONITOR MIB. For example:
% snmpwalk -C c -v 2c -c public 133.33.33.131 enterprise.6027.3.3.3
show mac accounting access-list Display MAC access list configurations and counters (if
configured).