Users Guide

DHCP packets information
Relay Information-option packets : 0
Relay Trust downstream packets : 0
Snooping packets : 0
Packets received on snooping disabled L3 Ports : 0
Snooping packets processed on L2 vlans : 142
DHCP Binding File Details
Invalid File : 0
Invalid Binding Entry : 0
Binding Entry lease expired : 0
List of Trust Ports :Te 1/4
List of DHCP Snooping Enabled Vlans :Vl 10
List of DAI Trust ports :Te 1/4
Displaying the Contents of the DHCPv6 Binding Table
To display the contents of the DHCP IPv6 binding table, use the following command.
• Display the contents of the binding table.
EXEC Privilege mode
show ipv6 dhcp snooping biniding
Example of the show ipv6 dhcp snooping binding Command
View the DHCP snooping statistics with the show ipv6 dhcp snooping command.
Dell#show ipv6 dhcp snooping binding
Codes : S - Static D – Dynamic
IPv6 Address MAC Address Expires(Sec) Type VLAN Interface
=========================================================================
11:11::22 11:22:11:22:11:22 120331 S Vl 100 Te 1/1
33::22 11:22:11:22:11:23 120331 S Vl 200 Te 1/1
333:22::22 11:22:11:22:11:24 120331 D Vl 300 Te 1/2
Debugging the IPv6 DHCP
To debug the IPv6 DHCP, use the following command.
• Display debug information for IPV6 DHCP.
EXEC Privilege mode
debug ipv6 dhcp
IPv6 DHCP Snooping MAC-Address Verication
Congure to enable verify source mac-address in the DHCP packet against the mac address stored in the snooping binding table.
• Enable IPV6 DHCP snooping .
CONFIGURATION mode
ipv6 dhcp snooping verify mac-address
Conguring the DHCP secondary-subnet
DHCP Secondary subnet feature is an extended feature of DHCP relay agent. After enabling DHCP Relay Secondary Subnet, relay
agent tries to get IP Address from secondary IP Address subnet pool, only when relay agent fails to get IP Address through primary
IP Address.
1. To enable all the DHCP relay secondary — subnet interfaces.
CONFIGURATION mode
Dynamic Host Conguration Protocol (DHCP)
291