Users Guide

Congure GVRP
To begin, enable GVRP.
To facilitate GVRP communications, enable GVRP globally on each switch. Then, GVRP conguration is per interface on a switch-by-
switch basis. Enable GVRP on each port that connects to a switch where you want GVRP information exchanged. In the following
example, GVRP is congured on VLAN trunk ports.
Figure 46. Global GVRP Conguration Example
Basic GVRP conguration is a two-step process:
1. Enabling GVRP Globally
2. Enabling GVRP on a Layer 2 Interface
Related Conguration Tasks
• Congure GVRP Registration
• Congure a GARP Timer
Enabling GVRP Globally
To congure GVRP globally, use the following command.
• Enable GVRP for the entire switch.
334
GARP VLAN Registration Protocol (GVRP)