Users Guide

Creating Output Policy Maps
1. Create an output policy map.
CONFIGURATION mode
policy-map-output
2. After you create an output policy map, do one or more of the following:
Applying an Output QoS Policy to a Queue
Specifying an Aggregate QoS Policy
Applying an Output Policy Map to an Interface
3. Apply the policy map to an interface.
Applying an Output QoS Policy to a Queue
To apply an output QoS policy to a queue, use the following command.
• Apply an output QoS policy to queues.
INTERFACE mode
service-queue
Specifying an Aggregate QoS Policy
To specify an aggregate QoS policy, use the following command.
• Specify an aggregate QoS policy.
POLICY-MAP-OUT mode
policy-aggregate
Applying an Output Policy Map to an Interface
To apply an output policy map to an interface, use the following command.
• Apply an input policy map to an interface.
INTERFACE mode
service-policy output
You can apply the same policy map to multiple interfaces, and you can modify a policy map after you apply it.
DSCP Color Maps
This section describes how to congure color maps and how to display the color map and color map conguration.
This sections consists of the following topics:
• Creating a DSCP Color Map
• Displaying Color Maps
• Display Color Map Conguration
Creating a DSCP Color Map
You can create a DSCP color map to outline the dierentiated services codepoint (DSCP) mappings to the appropriate color
mapping (green, yellow, red) for the input trac. The system uses this information to classify input trac on an interface based on
the DSCP value of each packet and assigns it an initial drop precedence of green, yellow, or red
682
Quality of Service (QoS)