Users Guide

• When you query an icmpStatsInErrors object in the icmpStats table by using the snmpget or snmpwalk command, the output
for IPv4 addresses may be incorrectly displayed. To correctly display this information under IP and ICMP statistics, use the show
ip traffic
command.
• When you query an IPv4 icmpMsgStatsInPkts object in the ICMP table by using the snmpwalk command, the echo response
output may not be displayed. To correctly display ICMP statistics, such as echo response, use the show ip traffic
command.
810
Simple Network Management Protocol (SNMP)