Owners Manual

distance
Define an administrative distance for particular routes to a specific IP address.
S4820T
Syntax
distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask
access-list-name] command.
Parameters
weight Specify an administrative distance. The range is from 1 to
255. The default is 110.
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If
you enter a router ID, include the mask for that router
address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n
format.
access-list-
name
(OPTIONAL) Enter the name of an IP standard access list, up
to 140 characters.
Defaults 110
Command
Modes
ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
1168
Open Shortest Path First (OSPFv2 and OSPFv3)