Owners Manual

Defaults No authentication is performed on the console lines. Local authentication is
performed on the virtual terminal and auxiliary lines.
Command
Modes
LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.6.0.0 Revised introductory and usage guidelines description.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0
Introduced on the E-Series.
Usage
Information
When configuring authentication, consider the following:
• If you configure the default authentication list using the default keyword, the
list applies it to all the local and remote connections globally, unless you have
specified some another authentication list for a specific connection.
• If you configure an authentication lists other than default, you must apply those
authentication lists to each connection.
• If you configure the aaa authentication login default command, the
login authentication default command automatically is applied to all
terminal lines.
Related
Commands
aaa authentication login — selects the login authentication methods.
password
Specify a password for users on terminal lines.
S4820T
Syntax
password [encryption-type] password
To delete a password, use the no password password command.
Security
1469