Owners Manual

md5 | sha (OPTIONAL) Enter the keyword md5 or sha to designate the
authentication level.
• md5 — Message Digest Algorithm
• sha — Secure Hash Algorithm
auth-password (OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the agent to receive packets from the
host. Minimum: eight characters long.
priv (OPTIONAL) Enter the keywords priv to initiate a privacy
authentication level setting.
des56 | aes128 (OPTIONAL) Enter the keyword des56 or aes128 to specify
the encryption mode.
• aes128 — Use 128 bit AES algorithm in CFB mode for
encryption.
• des56 — Use 56 bit DES algorithm in CBC mode for
encryption.
priv password (OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the host to encrypt the contents of
the message it sends to the agent. Minimum: eight
characters long.
access access-
list-name
(Optional) Enter the standard IPv4 access list name (a string
up to 16 characters long).
ipv6 access-
list-name
(Optional) Enter the keyword ipv6 then the IPv6 access list
name (a string up to 16 characters long).
access-list-
name ipv6
access-list-
name
(Optional) Enter both an IPv4 and IPv6 access list name.
Defaults As above.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.6.
(0.0)
Added aes 128 encryption algorithm parameter.
Version 9.4.
(0.0)
Added support for VRF.
1584
Simple Network Management Protocol (SNMP) and Syslog