Owners Manual

Parameters
prefix-name Enter a string up to 16 characters long as the name of the
prefix list, up to 140 characters long.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Usage
Information
Prefix lists redistribute OSPF and RIP routes meeting specific criteria.
Related
Commands
show ip route list — displays IP routes in an IP prefix list.
show ip prefix-list summary — displays a summary of the configured prefix lists.
permit
Configure a filter that passes packets meeting the criteria specified.
Syntax
permit ip-prefix [ge min-prefix-length] [le max-prefix-length]
To delete a forward filter, use the no permit ip-prefix command.
Parameters
ip-prefix Specify an IP prefix in the network/length format. For
example, 35.0.0.0/8 means match the first 8 bits of address
35.0.0.0.
268
Access Control Lists (ACL)