Owners Manual

The linkStatus of Hg Port 27 is FALSE
!------------------ output truncated ---------------!
Example
(Total-Buffer)
Dell(conf)#show hardware stack-unit 0 buffer total-buffer
Dell#sh hardware stack-unit 0 buffer total-buffer
----- Buffer Details for Stack-Unit 0 -----
Total Buffers allocated per Stack-Unit 46080
Example
(Buffer-Info)
Dell(conf)#sh hardware stack-unit 0 buffer unit 0 port 1
buffer-info
----- Buffer Stats for Unit 0 Port 1 -----
Maximum Shared Limit for the Port: 30720
Default Packet Buffer allocate for the Port: 120
Used Packet Buffer for the Port: 0
Example
(Queue2/
Buffer-Info)
Dell(conf)#sh hardware stack-unit 0 buffer unit 0 port 1 queue
2 buffer-info
----- Buffer Stats for Unit 0 Port 1 Queue 2 -----
Maximum Shared Limit: 30720
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
Related
Commands
clear hardware system-flow — clears the statistics from selected hardware
components.
show interfaces stack-unit — displays information on all interfaces on a specific S-
Series stack member.
show processes cpu (S-Series) — displays the CPU usage information based on the
processes running in an S-Series.
show system (S-Series and Z-Series) — displays the current status of all the stack
members or a specific member.
show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S4820T
Syntax
show hardware system-flow layer2 stack-unit id port-set number
[counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe,
display which system flow entry the packet hits and what
queue the packet takes as it dumps the raw system flow
tables.
stack-unit id Enter the keywords stack-unit to select a stack member
ID. The range is 0 to 11 for the S4820T.
612
Debugging and Diagnostics