Owners Manual

execute this command, the logical SFM on the standby RPM is immediately taken
offline and the SFM state is set as “standby”.
NOTE: This command could affect traffic when taking the secondary SFM
offline.
Example
Dell#show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
--------------------------------------
0 active
1 active
Dell#configure
Dell(conf)#redundancy sfm standby
Taking secondary SFM offline...
!
Dell(conf)#do show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
-----------------------------------------
0 active
1 standby
Dell(conf)#no redundancy sfm
Taking secondary SFM online...
!
10Dell(conf)#do show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
-------------------------------------------
0 active
1 active
redundancy synchronize
Manually synchronize data once between the Primary RPM and the Secondary RPM.
S4820T
Syntax
redundancy synchronize [full | persistent-data | system-data]
Parameters
full Enter the keyword full to synchronize all data.
persistent-data Enter the keywords persistent-data to synchronize the
startup configuration between RPMs.
High Availability (HA)
709