Owners Manual

• If you enter bgp, you can include the BGP as-number .
• If you enter isis, you can include the ISIS routing-
tag
.
• If you enter ospf, you can include the OSPF process-
id
.
process-id (OPTIONAL) Specify that only OSPF routes with a certain
process ID must be displayed.
routing-tag (OPTIONAL) Specify that only ISIS routes with a certain
routing tag must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the
directly connected routes.
all (OPTIONAL) Enter the keyword all to view both active and
non-active routes.
static (OPTIONAL) Enter the keyword static to view only routes
the ip route command configures.
summary (OPTIONAL) Enter the keyword summary. For more
information, refer to the
show ip route summary command.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Added support for VRF.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.9.1.0 Introduced VRF on the E-Series.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
904
IPv4 Routing