Owners Manual

Press RETURN to get started.

13d21h10m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful

for user on line console

This is the banner

Dell>

Commands

banner motd — sets a Message of the Day banner.

banner exec — enables the display of a text string when you enter EXEC mode.

banner motd

Set a message of the day (MOTD) banner.

Syntax

banner motd c line c

To delete a Message of the Day banner, enter no banner motd.

Parameters

c Enter a delineator character to specify the limits of the text

banner. The delineator is a percent character (%).

line Enter a text string for your MOTD banner the message with

your delineator. The delineator is a percent character (%).

Defaults No banner is configured.

Command

Modes

CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0 Introduced on the S6000.

Version

8.3.19.0

Introduced on the S4820T.

Version

8.3.12.0

Introduced on the S4810.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.1.1.0 Introduced on the E-Series ExaScale.

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

E-Series Original command

Control and Monitoring