Owners Manual

Usage

Information

After entering the banner login command, type one or more spaces and a

delineator character. Enter the banner text then the second delineator character.

When the user is connected to the router, if a message of the day banner is

configured, it displays first. If no message of the day banner is configured, the login

banner and prompt appear. After the user has logged in, the banner EXEC (if

configured) displays.

Commands

banner exec — enables the display of a text string when you enter EXEC mode.

banner login — sets a banner to display after successful login to the system.

cam-acl

Allocate content addressable memory (CAM) for IPv4 and IPv6 ACLs.

S4820T

Syntax

Parameters

default Use the default CAM profile settings and set the CAM as

follows:

• L3 ACL (ipv4acl): 4

• L2 ACL(l2acl): 6

• IPv6 L3 ACL (ipv6acl): 0

• L3 QoS (ipv4qos): 2

• L2 QoS (l2qos): 1

• OpenFlow: 0 (disabled)

• FCoE (fcoeacl): 0 (disabled)

• iSCSI Optimization (iscsioptacl): 0 (disabled)

Allocate space to each CAM region.

Enter the CAM profile name then the amount of CAM space

to be allotted. The total space allocated must equal 13. The

ipv6acl range must be a factor of 2.

Enter 4 or 8 for the number of OpenFlow FP blocks.

• 4: Creates 242 entries for use by the OpenFlow controller

(256 total entries minus the 14 entries reserved for

internal functionality)

• 8: Creates 498 entries for use by the OpenFlow controller

(512 total entries minus the 14 entries reserved for

internal functionality)

Using the fcoe parameter, enter the number of FP groups to

be allocated for FCoE transit. Enter

1 – 6; maximum six

Control and Monitoring