Reference Guide

Feature/Capability Support Status for Default VRF Support Status for Non-default
VRF
FRRP (if applicable) for VLANs Yes No
Multicast protocols (PIM-SM,
PIM-DM, MSDP)
Yes No
Layer 3 (IPv4/IPv6) ACLs,
TraceLists, PBR, QoS on VLANs
Yes Yes
NOTE: ACLs supported on
all VRF VLAN ports. IPv4
ACLs are supported on non-
default-VRFs also. IPv6 ACLs
are supported on default-
VRF only. PBR supported on
default-VRF only. QoS not
supported on VLANs.
Layer 3 (IPv4/IPv6) ACLs,
TraceLists, PBR, QoS on physical
interfaces and LAGs
Yes Yes
NOTE: ACLs supported on
all VRF ports. TraceLists are
common for entire line card
(except on ExaScale). PBR
supported on default-VRF
only. QoS supported on all
VRF ports.
IPv4 ARP Yes Yes
IPv6 Neighbor Discovery Yes No
Layer 2 ACLs on VLANs Yes No
FEED Yes No
Layer 2 QoS Yes Yes
Support for storm-control
(broadcast and unknown-
unicast)
Yes No
sFlow Yes No
VRRP on physical and logical
interfaces
Yes Yes
Secondary IP Addresses Yes No
Following IPv6 capabilities No
Basic Yes No
OSPFv3 Yes No
ISIS Yes No
1028
Virtual Routing and Forwarding (VRF)