Reference Guide

Command Output
show stack-unit {0-11 | all} stack
ports all ets details
Displays the ETS configuration applied to ingress
traffic on stack-links, including priorities and link
delay.
Example of the show dot1p-queue mapping Command
Example of the show dcb Command
Example of the show qos dcb-input Command
Example of the show qos dcb-output Command
Example of the show qos priority-groups Command
Example of the show interfaces pfc summary Command
Example of the show interface pfc statistics Command
Example of the show interface ets summary Command
Example of the show interface ets detail Command
Example of the show stack-unit all stack-ports all pfc details Command
Example of the show stack-unit all stack-ports all ets details Command
Example of the show interface DCBx detail Command (IEEE)
Example of the show interface DCBx detail Command (Legacy CEE)
Dell(conf)# show dot1p-queue-mapping
Dot1p Priority: 0 1 2 3 4 5 6 7
Queue : 0 0 0 1 2 3 3 3
Dell# show dcb
stack-unit 0 port-set 0
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current), 2 (configured)
Dell(conf)# show qos dcb-input
dcb-input pfc-profile
pfc link-delay 32
pfc priority 0-1
dcb-input pfc-profile1
no pfc mode on
pfc priority 6-7
Dell# show qos dcb-output
dcb-output ets
priority-group san qos-policy san
priority-group ipc qos-policy ipc
priority-group lan qos-policy lan
Dell#show qos priority-groups
priority-group ipc
priority-list 4
set-pgid 2
298
Data Center Bridging (DCB)