Reference Guide

tagged te 0/0
no ip address
shutdown
!
interface Vlan 100
no ip address
no shutdown
!
interface Vlan 1000
ip address 1.1.1.1/16
no shutdown
Uncompressed config size – 52 lines
write memory compressed
The write memory compressed CLI will write the operating configuration to the startup-config file in the
compressed mode. In stacking scenario, it will also take care of syncing it to all the standby and member
units.
The following is the sample output:
Dell#write memory compressed
!
Jul 30 08:50:26: %STKUNIT0-M:CP %FILEMGR-5-FILESAVED: Copied running-config to
startup-config in flash by default
write memory
Copies the current running configuration to the startup configuration. The write memory command
saves the running-configuration to the file labeled startup-configuration. When using a LOCAL CONFIG
FILE other than the startup-config not named “startup-configuration” (for example, you used a specific
file during the boot config command), the running-config is not saved to that file; use the copy
command to save any running-configuration changes to that local file.
copy compressed-config
Copy one file, after optimizing and reducing the size of the configuration file, to another location. Dell
Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip field).
Interfaces
459