Users Guide

threshold
Specify the minimum and maximum threshold values for the configured WRED profiles.
S4820T
Syntax
threshold min number max number max-drop-drop
To remove the threshold values, use the no threshold min number max number command.
Parameters
min number Enter the keyword min then the minimum threshold number for the WRED profile.
The range is from 1 to 9360.
max number Enter the keyword max then the maximum threshold number for the WRED profile.
The range is from 1 to 9360 KB.
max-drop-drop
number
Enter the keyword max-drop-drop followed by the maximum number of packets
for the WRED profile. The range is from 0 to 100 KB
Defaults none
Command Modes CONFIGURATION (config-wred)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Usage
Information
To configure the minimum and maximum threshold values for user-defined profiles, use this command.
Additionally, to modify the minimum and maximum threshold values for the pre-defined WRED profiles,
use this command. If you delete the threshold values of the pre-defined WRED profiles, the profiles revert
to their original default values.
Table 2. Threshold Values for the Pre-defined WRED Profiles
Pre-Defined WRED Profile
Name
Minimum
Threshold
Maximum
Threshold
wred_drop 0 0
100
wred_ten_y 467 4671 100
wred_ten_g 467 4671 50
wred_fortyg_y 467 4671 50
wred_fortyg_g 467 4671 25
Related
Commands
● wred-profile — creates a WRED profile.
Quality of Service (QoS) 1187