Users Guide

Parameters
method-list-
name
Enter the keywords method-list-name to specify that method list, created in
the aaa authentication login command, to be applied to the designated
terminal line.
default Enter the keyword default to specify that the default method list, created in the
aaa authentication login command, is applied to the terminal line.
Defaults No authentication is performed on the console lines. Local authentication is performed on the virtual
terminal and auxiliary lines.
Command Modes LINE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.6.0.0 Revised introductory and usage guidelines description.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.0 Introduced on the E-Series.
Usage
Information
If you configure the aaa authentication login default command, the login authentication default command
automatically is applied to all terminal lines.
When configuring authentication, consider the following:
● If you configure the default authentication list using the default keyword, the list applies it to all the
local and remote connections globally, unless you have specified some another authentication list for a
specific connection.
● If you configure an authentication lists other than default, you must apply those authentication lists to
each connection.
● If you configure the aaa authentication login default command, the login
authentication default command automatically is applied to all terminal lines.
Related
Commands
● aaa authentication login — selects the login authentication methods.
password
Specify a password for users on terminal lines.
Syntax
password [encryption-type] password
To delete a password, use the no password password command.
1266 Security