Users Guide

● hmac-md5: Force ssh to use hmac-md5 HMAC algorithm.
● hmac-md5-96: Force ssh to use hmac-md5-96 HMAC algorithm.
● hmac-sha1: Force ssh to use hmac-sha1 HMAC algorithm.
● hmac-sha1-96 : Force ssh to use hmac-sha1-96 HMAC algorithm.
● hmac-sha2-256 : Force ssh to use hmac-sha2-256 HMAC algorithm.
-p port-number (OPTIONAL) Enter the keyword -p then the port number. The range is from 1 to
65535. The default is 22.
-v {1 | 2} (OPTIONAL) Enter the keyword -v then the SSH version 1 or 2. The default is the
version from the protocol negotiation.
Defaults As shown in the Parameters section.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Removed the support for hmac-sha2-256-96 algorithm.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Added support for the following ciphers and HMAC alogorithms on the Z9000,
S6000, S4820T, S4820T. S6000–ON.
● aes128-cbc
● aes192-cbc
● aes256-cbc
● aes128-ctr
● aes192-ctr
● aes256-ctr
● hmac-sha2-256
● hmac-sha2-256-96
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Added support for the -c and -m parameters on the S4810.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Added IPv6 support. Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage
Information
Dell Networking OS supports both inbound and outbound SSH sessions using IPv4 or IPv6 addressing.
Inbound SSH supports accessing the system through the management interface as well as through a
physical Layer 3 interface.
Example
Dell#ssh 10.16.151.48 -l anvltest
1320 Security