Users Guide

show system
Display the status of all stack members or a specific member.
Syntax
show system [brief | stack-unit unit-id | stack-ports {status | topology}]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of system
information.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit then the stack member ID for
information on that stack member.
stack-ports
status | topology
(OPTIONAL) Enter the keywords stack-ports for information about the status
or topology of the stack ports.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for the disabled-ports parameter .
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 The brief parameter no longer displays the current Reload mode. To display
Reload mode, use the show reload-type command. Modified the show
system stack-unit command output to support Piece Part ID (PPID).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 The Boot Flash field displays the code level for boot code 2.8.1.1 and newer, while
older boot codes display as "Present".
7.7.1.0 Added Master Priority field.
7.6.1.0 Introduced on the S-Series.
Example (show
system brief)
Related
Commands
● show version – displays the Dell Networking OS version.
● show hardware stack-unit – displays the data plane and management plane input and output statistics
of a particular stack member.
134 Control and Monitoring