Users Guide

Version Description
E-Series legacy
command
Related
Commands
● clear logging — clears the logging buffer.
● default logging console — returns the logging console parameters to the default setting.
● show logging — displays the logging setting and system messages in the internal buffer.
logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
Parameters
facility-type (OPTIONAL) Enter one of the following parameters:
● auth (authorization system)
● cron (Cron/at facility)
● deamon (system deamons)
● kern (kernel)
● local0 (local use)
● local1 (local use)
● local2 (local use)
● local3 (local use)
●
local4 (local use)
● local5 (local use)
● local6 (local use)
● local7 (local use)
● lpr (line printer system)
● mail (mail system)
● news (USENET news)
● sys9 (system use)
● sys10 (system use)
● sys11 (system use)
● sys12 (system use)
● sys13 (system use)
● sys14 (system use)
● syslog (Syslog process)
● user (user process)
● uucp (Unix to Unix copy process)
The default is local7.
Defaults
local7
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
Simple Network Management Protocol (SNMP) and Syslog 1377