Users Guide

email-address
Configure the email addresses to reach the contact person.
Syntax
email-address primary email-address [alternate email-address]
To remove an email address, use either the no email-address primary or no email-address
alternate commands.
Parameters
primary email-
address
Enter the keyword primary then the primary email address for the person.
alternate email-
address
Enter the keyword alternate then the alternate email address for the person.
Command Modes SUPPORTASSIST PERSON
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
The email addresses must have the standard form of <username>@<email system> to be considered
valid.
This command is optional for SupportAssist service configuration.
Related
Commands
● preferred-method — configure the preferred method for contacting the person.
phone
Configure phone numbers to reach the contact person.
Syntax
phone primary phone [alternate phone]
To remove a phone number, use either the no phone primary or no phone alternate
commands.
Parameters
primary phone Enter the keyword primary then the primary phone number for the person.
alternate phone Enter the keyword alternate then the alternate phone number for the person.
Command Modes SUPPORTASSIST PERSON
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
The phone numbers may contain country codes, area codes and extensions, if necessary. Allowable
characters are 0 to 9, x, (, ), - and +.
This command is optional for SupportAssist service configuration.
Related
Commands
● preferred-method — configure the preferred method for contacting the person.
1436 SupportAssist