Users Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
Usage
Information
If the set community rt and soo are in the same route-map entry, the behavior defines as:
● If the rt option comes before soo, with or without the additive option, soo overrides the
communities rt sets.
● If the rt option comes after soo, without the additive option, rt overrides the communities soo
sets.
● If the rt with the additive option comes after soo, rt adds the communities soo sets.
Related
Commands
● set extcommunity rt — set the extended community route origins using the route-map.
show ip bgp ipv4 extcommunity-list
To display the IPv4 routes matching the extended community list name, use this feature.
Syntax
show ip bgp [ipv4 [multicast | unicast] | ipv6 unicast] extcommunity-list
name
Parameters
multicast Enter the keyword multicast to display the multicast route information.
unicast Enter the keyword unicast to display the unicast route information.
ipv6 unicast Enter the keywords ipv6 unicast to display the IPv6 unicast route information.
name (OPTIONAL) Enter the name of the extcommunity-list.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
Border Gateway Protocol 401