Users Guide

Usage
Information
If there is a type or sub-type that is not well-known, it is displayed as:TTSS:XX:YYYY.
Where TT is type, SS is sub-type displayed in hexadecimal format, XX:YYYY is the value divided into 2–
byte and 4-byte values in decimal format. This format is consistent with other vendors.
For example, if the extended community has type 0x04, sub-type 0x05, value 0x20 00 00 00 10 00, it
displays as:0x0405:8192:4096.
Non-transitive extended communities are marked with an asterisk.
Example
Dell#show ip bgp ipv4 multicast extcommunity-list
BGP routing table entry for 192.168.1.0/24, version 2
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
100.100.1.2 (2.4.0.1) Best
AS_PATH : 200
Next-Hop : 100.100.1.2, Cost : 0
Origin IGP, Metric 4294967295 (Default), LocalPref 100, Weight 0,
external
Communities :
300:400 500:600
Extended Communities :
RT:1111:4278080 SoO:35:4 SoO:36:50529043 SoO:37:50529044
SoO:38:50529045 SoO:0.0.0.2:33 SoO:506.62106:34 0x0303:254:11223*
Dell#
show ip bgp paths extcommunity
To display all BGP paths having extended community attributes, use this feature.
S4820T
Syntax
show ip bgp paths extcommunity
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
Usage
Information
The following describes the show ip bgp paths extcommunity command shown in the following
example.
402 Border Gateway Protocol