Users Guide

Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage
Information
Use this command to add domain names to the DNS lists corresponding to a specific VRF. You can add up
to a maximum of six domain names to the DNS list corresponding to a VRF. This domain is used to
complete the unqualified host names.
Example
Dell(conf)# ip domain-list vrf jay dell.com
Dell(conf)# ip domain-list vrf jay force10.com
ip host
Configures a mapping between the host name server and the IP address for a specific VRF. This mapping information is used by
the name-to-IP address table to resolve host names.
S4820T
Syntax
ip host [vrf vrf-name] name ip-address
To undo the host name server to IP address mapping for VRFs, use the no ip host [vrf vrf-
name] name ip-address command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF to configure the
name server to IP address mapping for that VRF.
name Enter the name od the host to be associated with an IP address.
ip-address Enter the IP address of the name server in dotted decimal format.
Defaults None
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage
Information
Use this command to create a mapping between a host name server and its IP addresses for a specific
VRF.
Dynamic Host Configuration Protocol (DHCP) 523