Users Guide

Version Description
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage
Information
If no ports are GVRP participants, the message output changes from GVRP Participants running
on <port_list> to GVRP Participants running on no ports.
Example
Dell# show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
----------------------------------------------
Te 3/1 Disabled No
Te 3/2 Enabled No
Te 3/3 Disabled No
Te 3/4 Disabled No
Te 3/5 Disabled No
Te 3/6 Disabled No
Te 3/7 Disabled No
Te 3/8 Disabled No
Dell# show gvrp brief
Related
Commands
● show gvrp statistics — display the GVRP statistics.
show gvrp statistics
Display the GVRP configuration statistics.
S4820T
Syntax
show gvrp statistics {interface interface | summary}
Parameters
interface
interface
(OPTIONAL) Enter the keyword interface then one of the interface keywords
and the interface information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
summary Enter the keyword summary to display just a summary of the GVRP statistics.
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
GARP VLAN Registration (GVRP) 573