Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

Version Description

8.3.7.0 Introduced on the S4810.

7.7.1.0 Added support for TFTP and SCP.

7.6.1.0 Introduced on the S-Series.

Usage

Information

RFC 3986 specifies that IPv6 host addresses in a uniform resource identifier (URI) must be enclosed in

square brackets, [X:X:X:X::X]. For maximum flexibility this command accepts IPv6 host addresses with or

without the square brackets.

Reload Dell Networking OS after executing this command. To copy Dell Networking OS from the

management unit to one or more stack members, use the upgrade system stack-unit (S-

Series stack member) command.

Example

Dell# upgrade system ?

ftp: Copy from remote file system (ftp://userid:password@hostip/

filepath)

scp: Copy from remote file system (scp://userid:password@hostip/

filepath)

tftp: Copy from remote file system (tftp://hostip/filepath)

Dell# upgrade system ftp://username:password@10.11.1.1/FTOS-SB-7.7.1.0.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!

Erasing Sseries ImageUpgrade Table of Contents, please wait

.!........................................................

...........................................................

....................................!

12946259 bytes successfully copied

Dell# reload

Dell#

verify

Validate the software image on the flash drive after the image has been transferred to the system, but before the image has

been installed.

Syntax

verify { md5 | sha256 }[ flash:// ] img-file [hash-value]

Parameters

md5 Enter the md5 keyword to use the MD5 message-digest algorithm.

sha256

Enter the sha256 keyword to use the SHA256 Secure Hash Algorithm

flash:// (Optional). Enter the flash:// keyword. The default is to use the flash drive. You

can just enter the image file name.

img-file

Enter the name the Dell Networking software image file to validate.

hash-value

(Optional). Enter the relevant hash published on i-Support.

Defaults flash drive

Command Modes EXEC mode

Command

History

Version 9.5.(0.0)

Version Description

9.8(1.0) Introduced on the Z9100–ON.

80 File Management