Users Guide

ipv6 nd ra-guard policy
Define the RA guard policy name and enter the RA guard policy list configuration mode.
Syntax
ipv6 nd ra-guard policy policy-name
Parameters
policy policy-
name
Enter the keyword policy then the policy-name. The policy name allows a
maximum of 140 characters.
Defaults None
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.9(0.0) Introduced on the Z9500.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000
switches.
Related
Commands
● ipv6 nd ra-guard enable — configure the RA guard related commands.
managed-config-flag
Set the managed address configuration flag.
Syntax
managed-config-flag {on | off}
To clear the flag, use the no managed-config-flag {on | off} command.
Parameters
on Enter the keyword on to set the managed-config-flag value as ON.
off Enter the keyword off to set the managed-config flag value as OFF.
Defaults None
Command Modes POLICY LIST CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Related
Commands
● ipv6 nd ra-guard enable — configure the RA guard related commands.
● ipv6 nd raguard policy policy-name — define the router advertisement (RA) guard policy name and
enter the RA guard policy configuration mode.
964 Neighbor Discovery Protocol (NDP)