Users Guide

Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Related
Commands
● ipv6 nd ra-guard enable — configure the RA guard related commands.
● ipv6 nd raguard policy policy-name — define the RA guard policy name and enter the RA guard policy
configuration mode.
other-config-flag
Enable the verification of the advertised other configuration parameter. If this command is not configured, the verification
process is bypassed.
Syntax
other-config-flag {on | off}
To reset the other configuration parameter, use the no other-config-flag {on | off}
command.
Parameters
on Enter the keyword on to set the other-config-flag value as ON.
off Enter the keyword off to set the other-config flag value as OFF.
Defaults None
Command Modes POLICY LIST CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.9(0.0) Introduced on the Z9500.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Related
Commands
● ipv6 nd ra-guard enable — configure the RA guard related commands.
● ipv6 nd raguard policy policy-name — define the router advertisement (RA) guard policy name and
enter the RA guard policy configuration mode.
reachable-time
Enable the verification of the configured reachability time in the received RA packets.
Syntax
reachable—time value
To reset the advertised reachability time, use the no reachable-timevalue command.
966 Neighbor Discovery Protocol (NDP)