Owners Manual

boot system stack-unit 0 primary system: A:

boot system stack-unit 0 secondary tftp://10.16.127.35/Dell-

SI-9-0-2-0.bin

boot system stack-unit 0 default system: A:

boot system gateway 10.16.132.254

redundancy auto-synchronize full

redundancy disable-auto-reboot stack-unit

redundancy disable-auto-reboot stack-unit 0

redundancy disable-auto-reboot stack-unit 1

redundancy disable-auto-reboot stack-unit 2

redundancy disable-auto-reboot stack-unit 3

redundancy disable-auto-reboot stack-unit 4

redundancy disable-auto-reboot stack-unit 5

hardware watchdog stack-unit 0

hardware watchdog stack-unit 1

hardware watchdog stack-unit 2

Example

Dell#show running-config status

running-config bytes 10257, checksum 0xFD33339F

startup-config bytes 10257, checksum 0xFD33339F

Usage

Information

The status option allows you to display the size and checksum of the running

configuration and the startup configuration.

show startup-config

Display the startup configuration.

S4820T

Syntax

show startup-config

Command

Modes

EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0 Introduced on the S6000.

Version

8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 7.6.1.0 Introduced on S-Series

File Management