Reference Guide

Related
Commands
• show version – displays the Dell Networking OS version.
• show hardware stack-unit – displays the data plane and management plane
input and output statistics of a particular stack member.
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking technical support
to perform troubleshooting on S-Series or Z-Series switches.
S4820T
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keywords stack-unit to view CPU
memory usage for the stack member designated by unit-id.
The unit ID range for the S4820T is from 0 to 11.
page (OPTIONAL) Enter the keyword page to view 24 lines of text
at a time. Press the SPACE BAR to view the next 24 lines.
Press the ENTER key to view the next line of text.
When using the pipe command ( | ), enter one of these
keywords to filter command output. For details about
filtering commands, refer to CLI Basics.
save Enter the keyword save to save the command output.
flash: Save to local flash drive (flash://filename. A
maximum of 20 characters.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced save to the file options.
Version 7.6.1.0 Introduced on the S-Series.
150
Control and Monitoring