Reference Guide

show ip as-path-access-lists
Display the all AS-PATH access lists configured on the E-Series.
S4820T
Syntax
show ip as-path-access-lists
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
pre-Version
6.1.1.0
Introduced on the E-Series.
Example
Dell#show ip as-path-access-lists
ip as-path access-list 1
permit ^$
permit ^\(.*\)$
deny .*
ip as-path access-list 91
permit ^$
deny .*
permit ^\(.*\)$
Dell#
IP Community List Commands
IP community list commands are supported on the S4820T platform.
ip community-list
Enter COMMUNITY-LIST mode and create an IP community-list for BGP.
S4820T
Syntax
ip community-list comm-list-name
Access Control Lists (ACL)
301