Users Guide
TLV Tx Status is enabled
PFC Link Delay 45556 pause quanta
Application Priority TLV Parameters :
--------------------------------------
FCOE TLV Tx Status is disabled
ISCSI TLV Tx Status is disabled
Local FCOE PriorityMap is 0x8
Local ISCSI PriorityMap is 0x10
Remote FCOE PriorityMap is 0x8
Remote ISCSI PriorityMap is 0x8
0 Input TLV pkts, 1 Output TLV pkts, 0 Error pkts, 0 Pause Tx pkts, 0 Pause Rx pkts
The following table describes the show interface pfc summary command elds.
Table 19. show interface pfc summary Command Description
Fields Description
Interface Interface type with stack-unit and port number.
Admin mode is on; Admin is enabled PFC Admin mode is on or o with a list of the congured PFC
priorities . When PFC admin mode is on, PFC advertisements are
enabled to be sent and received from peers; received PFC
conguration takes eect. The admin operational status for a DCBx
exchange of PFC conguration is enabled or disabled.
Remote is enabled; Priority list Remote Willing Status is enabled Operational status (enabled or disabled) of peer device for DCBx
exchange of PFC conguration with a list of the congured PFC
priorities. Willing status of peer device for DCBx exchange (Willing
bit received in PFC TLV): enabled or disabled.
Local is enabled DCBx operational status (enabled or disabled) with a list of the
congured PFC priorities
Operational status (local port) DCBx operational status (enabled or disabled) with a list of the
congured PFC priorities.
Port state for current operational PFC conguration:
• Init: Local PFC conguration parameters were exchanged with
peer.
• Recommend: Remote PFC conguration parameters were
received from peer.
• Internally propagated: PFC conguration parameters were
received from conguration source.
PFC DCBx Oper status Operational status for exchange of PFC conguration on local port:
match (up) or mismatch (down).
State Machine Type Type of state machine used for DCBx exchanges of PFC
parameters:
• Feature: for legacy DCBx versions
• Symmetric: for an IEEE version
TLV Tx Status Status of PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specied priority trac.
Application Priority TLV: FCOE TLV Tx Status Status of FCoE advertisements in application priority TLVs from
local DCBx port: enabled or disabled.
Application Priority TLV: ISCSI TLV Tx Status Status of ISCSI advertisements in application priority TLVs from
local DCBx port: enabled or disabled.
258 Data Center Bridging (DCB)










