Reference Guide

The following shows the output of the show commands on Router 1.
Router 1
Dell#show ip vrf
VRF-Name VRF-ID Interfaces
default-vrf 0 Gi 2/0-89,
Te 3/0-3,
Gi 4/0-89,
Gi 5/0-89,
Gi 7/3-47,
Gi 9/0-47,
Gi 10/0-47,
Gi 11/0-47,
Gi 12/0-47,
Gi 13/0-47,
Ma 0/0,
Ma 1/0,
Nu 0,
Vl 1
blue 1 Gi 7/0,
Vl 128
orange 2 Gi 7/1,
Vl 192
green 3 Gi 7/2,
Vl 256
Dell#show ip ospf 1 neighbor
Neighbor ID Pri State Dead Time Address Interface Area
1.0.0.2 1 FULL/DR 00:00:32 1.0.0.2 Vl 128 0
Dell#sh ip ospf 2 neighbor
Neighbor ID Pri State Dead Time Address Interface Area
2.0.0.2 1 FULL/DR 00:00:37 2.0.0.2 Vl 192 0
Dell#show ip route vrf blue
Codes: C - connected, S - static, R - RIP,
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally
Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
> - non-active route, + - summary route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last
Change
----------- ------- -----------
-----------
C 1.0.0.0/24 Direct, Vl 128 0/0 00:20:48
C 10.0.0.0/24 Direct, Gi 7/0 0/0
00:10:06
O 11.0.0.0/24 via 1.0.0.2, Vl 128 110/2 00:11:13
Dell#show ip route vrf orange
Codes: C - connected, S - static, R - RIP,
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally
Originated,
Virtual Routing and Forwarding (VRF)
1035