Reference Guide

9 -rw- 27674906 Jul 06 2007 00:20:24 FTOS-EF-4.7.4.302.bin

10 -rw- 27674906 Jul 06 2007 19:54:52 boot-image-FILE

11 drw- 8192 Jan 01 1980 00:18:28 diag

12 -rw- 7276 Jul 20 2007 01:52:40 startup-config.bak

13 -rw- 7341 Jul 20 2007 15:34:46 startup-config

14 -rw- 27674906 Jul 06 2007 19:52:22 boot-image

15 -rw- 27674906 Jul 06 2007 02:23:22 boot-flash

--More--

View Configuration Files

Configuration files have three commented lines at the beginning of the file, as shown in the following

example, to help you track the last time any user made a change to the file, which user made the

changes, and when the file was last saved to the startup-configuration.

In the running-configuration file, if there is a difference between the timestamp on the “Last

configuration change” and “Startup-config last updated,” you have made changes that have not been

saved and are preserved after a system reboot.

Example of the show running-config Command

Dell#show running-config

Current Configuration ...

! Version 9.4(0.0)

! Last configuration change at Tue Mar 11 21:33:56 2014 by admin

! Startup-config last updated at Tue Mar 11 12:11:00 2014 by default

boot system stack-unit 0 primary system: B:

boot system stack-unit 0 secondary tftp://10.16.127.35/dt-maa-s4810-2

boot system stack-unit 0 default tftp://10.16.127.35/dt-maa-s4810-2

boot system gateway 10.16.130.254

Page 57 - Under Managing the File System, the word external Flash must be

removed

Page 57 - The output of show file-systems must be modified as follows.

Dell#show file-systems

Size(b) Free(b) Feature Type Flags Prefixes

2056916992 2056540160 FAT32 USERFLASH rw flash:

- - - network rw ftp:

- - - network rw tftp:

- - - network rw scp:

Dell#

Managing the File System

The Dell Networking system can use the internal Flash, external Flash, or remote devices to store files.

The system stores files on the internal Flash by default but can be configured to store files elsewhere.

To view file system information, use the following command.

• View information about each file system.

EXEC Privilege mode

show file-systems

Getting Started