Reference Guide

Configuring Policy-Based Rate Shaping
To configure policy-based rate shaping, use the following command.
• Configure rate shape egress traffic.
QOS-POLICY-OUT mode
rate-shape
Allocating Bandwidth to Queue
Schedule packets for egress based on Deficit Round Robin (DRR). These strategies both offer a
guaranteed data rate.
The following table lists the default bandwidth weights for each queue, and their equivalent percentage
which is derived by dividing the bandwidth weight by the sum of all queue weights.
Table 56. Default Bandwidth Weights
Queue Default Weight Equivalent Percentage
0 1 6.67%
1 2 13.33%
2 4 26.67%
3 8 53.33%
• Allocate bandwidth to queues.
bandwidth-percentage
Specifying WRED Drop Precedence
Specifying WRED drop precedence is supported on the S4820T platform.
• Specify a WRED profile to yellow and/or green traffic.
QOS-POLICY-OUT mode
wred
For more information, refer to Applying a WRED Profile to Traffic.
748
Quality of Service (QoS)