Users Guide

MIB Object OID Description
entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 Identifies a particular conceptual row
associated with the indicated
entPhysicalIndex and
entLogicalIndex pair.
Viewing the entAliasMappingTable MIB
• To view the entAliasMappingTable generated by the system, use the following command.
snmpwalk -v 2c -c public -On 10.16.150.97 1.3.6.1.2.1.47.1.3.2.1
.1.3.6.1.2.1.47.1.3.2.1.2.5.0 = OID: .1.3.6.1.2.1.2.2.1.1.2097157
.1.3.6.1.2.1.47.1.3.2.1.2.9.0 = OID: .1.3.6.1.2.1.2.2.1.1.2097669
.1.3.6.1.2.1.47.1.3.2.1.2.13.0 = OID: .1.3.6.1.2.1.2.2.1.1.2098181
.1.3.6.1.2.1.47.1.3.2.1.2.17.0 = OID: .1.3.6.1.2.1.2.2.1.1.2098693
.1.3.6.1.2.1.47.1.3.2.1.2.21.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099205
.1.3.6.1.2.1.47.1.3.2.1.2.25.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099717
.1.3.6.1.2.1.47.1.3.2.1.2.29.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100228
.1.3.6.1.2.1.47.1.3.2.1.2.30.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100356
.1.3.6.1.2.1.47.1.3.2.1.2.31.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100484
MIB Support for LAG
Dell Networking provides a method to retrieve the configured LACP information (Actor and Partner). Actor (local interface) is to designate
the parameters and flags pertaining to the sending node, while the term Partner (remote interface) is to designate the sending node’s
view of its peer parameters and flags. LACP provides a standardized means for exchanging information, with partner systems, to form a
link aggregation group (LAG). The following table lists the related MIB objects:
Table 99. MIB Objects for LAG
MIB Object OID Description
lagMIB 1.2.840.10006.300.43 Contains information about link aggregation
module for managing 802.3ad.
lagMIBObjects 1.2.840.10006.300.43.1
dot3adAgg 1.2.840.10006.300.43.1.1
dot3adAggTable 1.2.840.10006.300.43.1.1.1 Contains information about every
Aggregator that is associated with a system.
dot3adAggEntry 1.2.840.10006.300.43.1.1.1.1 Contains a list of Aggregator parameters
and indexed by the ifIndex of the
Aggregator.
dot3adAggMACAddress 1.2.840.10006.300.43.1.1.1.1.1 Contains a six octet read–only value
carrying the individual MAC address
assigned to the Aggregator.
dot3adAggActorSystemPriority 1.2.840.10006.300.43.1.1.1.1.2 Contains a two octet read–write value
indicating the priority value associated with
the Actor’s system ID.
dot3adAggActorSystemID 1.2.840.10006.300.43.1.1.1.1.3 Contains a six octet read–write MAC
address value used as a unique identifier for
the system that contains the Aggregator.
854 Simple Network Management Protocol (SNMP)