Reference Guide

ip ftp username — sets the user name for the FTP sessions.
ip ftp vrf
Configures an FTP client with a VRF that is used to connect to the FTP server.
S4820T
Syntax
ip ftp [vrf vrf-name]
To undo the FTP client configuration, use the ip ftp [vrf vrf-name]
command.
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to
specify the VRF that is used by the FTP client.
Defaults Disabled
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant FTOS Command Line Reference Guide.
The following is a list of the FTOS version history for this command.
Version 9.4.
(0.0)
Introduced on the S-Series and Z-Series.
Usage
Information
Use this command to make the FTP clients VRF aware. The VRF name that you
specify is used by the FTP client to reach the FTP server. If no VRF is specified, then
the default vrf is used.
ip ftp source-interface
Specify an interface’s IP address as the source IP address for FTP connections.
S4820T
Syntax
ip ftp source-interface interface
To delete an interface, use the no ip ftp source-interface interface
command.
Control and Monitoring
109