Reference Guide
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information
One trace log message is generated for each command. No password information
is saved to this file. A command-history trace log is saved to a file after an RPM
failover. Dell Networking TAC analyzes this file to help identify the root cause of an
RPM failover.
Example
Dell#show command-history
[11/20 15:47:22]: CMD-(CLI):[service password-encryption]by
default from console
[11/20 15:47:22]: CMD-(CLI):[service password-encryption
hostname Force10]by
default from console
- Repeated 3 times.
[11/20 15:47:23]: CMD-(CLI):[service timestamps log
datetime]by default from
console
[11/20 15:47:23]: CMD-(CLI):[hostname Force10]by default from
console
[11/20 15:47:23]: CMD-(CLI):[enable password 7 ******]by
default from console
[11/20 15:47:23]: CMD-(CLI):[username admin password 7
******]by default from
console
[11/20 15:47:23]: CMD-(CLI):[enable restricted 7 ******]by
default from console
[11/20 15:47:23]: CMD-(CLI):[protocol spanning-tree rstp]by
default from console
[11/20 15:47:23]: CMD-(CLI):[protocol spanning-tree pvst]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no disable]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/1]by
default from console
[11/20 15:47:23]: CMD-(CLI):[ip address 1.1.1.1 /24]by default
from console
[11/20 15:47:23]: CMD-(CLI):[ip access-group abc in]by default
from console
[11/20 15:47:23]: CMD-(CLI):[no shutdown]by default from
console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/2]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/3]by
default from console
[11/20 15:47:23]: CMD-(CLI):[ip address 5.5.5.1 /24]by default
from console
[11/20 15:47:23]: CMD-(CLI):[no shutdown]by default from
console
Control and Monitoring
127