Reference Guide

Version 7.6.1.0 Introduced for the C-Series and S-Series.
Example
Dell#show software ifm clients summary
ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp
IPM 0 0x00000000 0x00000000 0x90ff71f3 0x021e0e81 31
RTM 0 0x00000000 0x00000000 0x800010ff 0x01930000 43
VRRP 0 0x00000000 0x00000000 0x803330f3 0x00400000 39
L2PM 0 0x00000000 0x00000000 0x87ff79ff 0x0e032200 45
ACL 0 0x00000000 0x00000000 0x867f50c3 0x000f0218 44
OSPF 0 0x00000dfa 0x00400098 0x00000000 0x00000000 0
PIM 0 0x000000f3 0x00030000 0x00000000 0x00000000 0
IGMP 0 0x000e027f 0x00000000 0x00000000 0x00000000 0
SNMP 0 0x00000000 0x00000000 0x800302c0 0x00000002 30
EVTTERM 0 0x00000000 0x00000000 0x800002c0 0x00000000 29
MRTM 0 0x00000000 0x00000200 0x81f7103f 0x00000000 38
DSM 0 0x00000000 0x00000000 0x80771003 0x00000000 32
LACP 0 0x00000000 0x00000000 0x8000383f 0x00000000 35
DHCP 0 0x00000000 0x00000000 0x800000c2 0x0000c000 37
V6RAD 0 0x00000433 0x00030000 0x00000000 0x00000000 0
Unidentified Client0 0x006e0002 0x00000000 0x00000000
0x00000000 0
Dell#
show system
Display the status of all stack members or a specific member.
S4820T
Syntax
show system [brief | stack-unit unit-id | stack-ports {status |
topology}]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an
abbreviated list of system information.
stack-unit unit-
id
(OPTIONAL) Enter the keywords stack-unit then the stack
member ID for information on that stack member. The unit
ID range for the S4820T is from 0 to 11.
stack-ports
status |
topology
(OPTIONAL) Enter the keywords stack-ports for
information about the status or topology of the S4810 stack
ports.
NOTE: This option applies to the S4810 or S4820T
system only.
Command
Modes
• EXEC
• EXEC Privilege
146
Control and Monitoring