Reference Guide

Usage
Information
The following message displays to confirm the command.
Setting ports Fo 0/60 as stack group will make their interface
configs obsolete after a reload.[confirm yes/no]: If “y” is
entered, all non-default configurations on any member ports of
the current stack group will be removed when the unit is
rebooted.
NOTE: Any scripts used to streamline the stacking configuration process must
be updated to reflect the Command Mode change from EXEC Privilege to
CONFIGURATION to allow the scripts to work correctly.
upgrade system stack-unit
Copy the boot image or Dell Networking OS from the management unit to one or more stack members.
S4820T
Syntax
upgrade {boot | system} stack-unit {all | 0-11 | A | B}
Parameters
boot Enter the keyword boot to copy the boot image from the
management unit to the designated stack members.
system Enter the keyword system to copy the Dell Networking OS
image from the management unit to the designated stack
members.
stack-unit Enter the stack-unit number. For the S4820T, the range is
from 0 to 11.
all Enter the keyword all to copy the designated image to all
stack members.
0-11 Enter the unit ID of the stack member to which to copy the
designated image.
A Enter the keyword A to upgrade all stacked units in System A
(
S4820T only).
B Enter the keyword B to upgrade all stacked units in System B
(S4820T only).
Defaults none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Stacking
1619